Cuprinol

All surfaces should be clean, dry and free from dirt, debris and other contaminates.|Minimum of 2/3 coats required.|Ensure timber is fully dry (allow 3 days) before laying plastic floor tiles, foam and rubber-backed carpets, loft insulation etc.|Treatment will typically dry in 1-3 days.

All surfaces should be pre swept with a stiff brush or broom to remove all surface dirt, debris and other surface contaminates.|Remove any algae, lichen or moss using an appropriate decking cleaner.|Wood that has been previously stained, painted or varnished should be stripped back...

Remove excessive organic growth and soiling with a scraper, stiff brush or broom before treating decking boards.|For heavy mould/algae growth apply undiluted. |For lighter growth dilute with an equal amount of water.|Apply using a brush, spray or watering can.|Scrub affected areas and leave for...

Wooden garden furniture should be free from loose surface dirt and debris.|Spray sparingly onto furniture leaving for a few seconds and then wipe off with a soft cloth.|No need to rinse with water.

Ensure that wooden surfaces are clean, dry and free from dirt, dust and any other surface contaminants.|Wearing protective gloves apply with a paint brush.|Immediately after application work into the surface of the wood using a mild abrasive scrubbing pad or stiff bristle brush.|Leave for...

Ensure that the wood to be treated is clean, dry and free from dirt, debris, oil and grease.|Apply 2-3 coats and brush evenly along the grain, avoiding overlaps.|Allow 2-6 hours between coats under normal weather conditions. |Allow a few days before heavy use or...

Ensure that wood to be treated is clean, dry and free from dust, dirt an any other surface contaminants,|Apply 2 light coats with a brush or rag.|Allow the first coat to penetrate before applying the second coat.

All surfaces should be clean and dry. If it has been previously coated, loose, flaking paint should be stripped back to bare wood.|Minimum of 2 coats required, subsequent coats must be applied on the same day, no longer than 8 hours apart.|Lightly sand down...

All surfaces should be clean and dry. If it has been previously coated, loose, flaking paint should be stripped back to bare wood.|Minimum of 2 coats required, subsequent coats must be applied on the same day, no longer than 8 hours apart.|Lightly sand down...

All surfaces should be clean and dry. If it has been previously coated, loose, flaking paint should be stripped back to bare wood.|Minimum of 2 coats required, subsequent coats must be applied on the same day, no longer than 8 hours apart.|Lightly sand down...

All surfaces should be clean and dry. If it has been previously coated, loose, flaking paint should be stripped back to bare wood.|Minimum of 2 coats required, subsequent coats must be applied on the same day, no longer than 8 hours apart.|Lightly sand down...

All surfaces should be clean and dry. If it has been previously coated, loose, flaking paint should be stripped back to bare wood.|Minimum of 2 coats required, subsequent coats must be applied on the same day, no longer than 8 hours apart.|Lightly sand down...

Brush along the grain, if deeper colour is required, more coats can be reapplied.|Leave 2-4 hours between coats.|Product should only be used on rough, sawn wood. |Do not apply in temperatures below 5 or in rain.

Ensure that wooden surface is clan, dry and free from dust, dirt and any other surface contaminates.|Apply 2 light coats from a distance (15cm/6).|Do not concentrate pray on one spot.|Allow 15 minutes between coats.|This product is NOT suitable for toys.

Ensure wooden surfaces are clean, dry and free from surface dirt.|Shake the pack thoroughly before use.|Ensure you stand 15cm-30cm (6-12) from the wood surface.|Do not apply in temperatures below 5 or rain.|Allow 2-6 hours between coats.

Ensure the nozzle, hose and reservoir are cleaned thoroughly before and after use.

Cuprinol Ultimate Furniture Oil is a high performance treatment for teak and other hardwood|It has a special formulation that provides longer lasting protection than traditional teak oil and works in 3 ways|Waxes increase the the water repellency of the wood protecting it from the...

Cuprinol Ultimate Wood Preserver has a superior formulation that works in three ways; UV filters give long lasting colours for up to 5 years, added waxes and resins provide advanced weather protection and active ingredients penetrate deep into the wood to protect against rot,...

Cuprinol Ultimate Furniture Oil is a high performance treatment for teak and other hardwood|It has a special formulation that provides longer lasting protection than traditional teak oil and works in 3 ways|Waxes increase the the water repellency of the wood protecting it from the...

Cuprinol Ultimate Furniture Oil is a high performance treatment for teak and other hardwood|It has a special formulation that provides longer lasting protection than traditional teak oil and works in 3 ways|Waxes increase the the water repellency of the wood protecting it from the...