Simpson Strong Tie

Pre-galvanised mild steel.|The 2 obround holes make adjustments easier.|Suitable on wood, concrete, metal, PVC.|Used on frames or storage cabinets.

Available in galvanised or stainless steel.|FB20A supplied in a rigged plastic dispenser for ease of use.|Supplied on a 10 metre roll.

For fixing window and door frames to masonry|Slot for enhanced mortar key|Design reduces risk of injury from sharp edges

Pre-galvanised mild steel.|Load capacity in all directions|Improved capacities for full and partial nailing|Fastening of small trusses.|Cladding plates, cladding uprights.|Rafter anchors, cantilevers, headers, etc.

For hanger applications requiring additional strength|Nail holes and bolt hole options - simple installation|Hanger depth to be at least 60% of the carried member

Replacement for traditional heavy duty bent straps|Reinforced corner provides strength where required|Only 1.5mm thick so no need for time consuming joist / block notching

Heavy duty restraint strap made from galvanised edge coated steel for lateral restraint of roof trusses, rafters and joints tied into masonry walls. |For horizontal restraint when connecting timber floor and roof systems to masonry walls.

Wide leg provides greater nail spacing for superior performance|Location tab and speed prongs make installation quicker and more accurateVersatile face fix or wrap over fix

Light duty bracket for numerous applications|Commonly used in reinforcing furniture assemblies|Versatile connection

Replacement for traditional light duty bent straps|For vertical restraint applications|Holds down wall plate

Light bracket with reinforcement for enhanced performance|For numerous, small structural joinery applications

CE Marked.|1.5mm thick.|Formed edge design gives additional strength on bend.|Complies with BS EN 845-1.

Restraint strap made from galvanised edge coated steel for lateral restraint of roof trusses, rafters and joints tied into masonry walls. |For horizontal restraint when connecting timber floor and roof systems to masonry walls.

Heavy restraint straps meet requirements for lateral restraint of roof trusses, rafters and joists tied into masonry walls.|Light restraint straps are designed for vertical loads such as wall plates on top of masonry walls.|All common sizes in stock from 500 to 2000mm long, 100mm...

Mini joist hanger for light duty applications|Ideally suited for small timber sections and timber members such as trimmersEmbossments for additional strength

For internal use with skim coat plaster|Used with 3mm plaster depth|25mm mesh wing for excellent plaster key

For connecting two or more timber members together along the outside faces

Pre-galvanised mild steel.|Available in various width.|Wood to wood connections.|To strengthen existing timber assemblies.