JB Weld

Prepare - clean all threads with cleaning solvent & shake the product thoroughly before use.|Apply - For thru holes, apply several drops onto the bolt at the nut engagement area.|Assemble - Assemble and tighten as usual. When tightening to established torque valves, torque condensation...

Prepare - Clean and dry surface area.|Apply - Apply even, continuous 1/4 bead of silicone to one surface areas. Surround all bolt hole with silicone.|Assemble - Reconnect parts while silicone is wet.|Secure - Hand tighten until silicone begins to squeeze out.|Dry - Allow drying...

Prepare: Clean and dry surface area.|Apply: Apply even, continuous 1/4 bead of silicone to one surface area. Surround all bolt holes with silicone. |Assemble: Reconnect parts while silicone is wet.|Secure: Hand tighten until silicone begins to squeeze out.|Dry: Allow drying for 1 hour and...

Cut: Remove required amount of putty.|Mix: Thoroughly knead putty with fingers to a uniform colour.|Apply: Press putting firmly to the surface to be repaired.